Home

Advantages of
Investment Casting

Services and
Capabilities

The Investment
Casting Process

Investment Casting
Gallery

Alloy List Contact Us

Advantages of Investment Casting Process

Design Flexibility

Castings can be manufactured with complex features, including interior cavities, complex passageways, three dimensional contours, thin walls, holes and undercuts, eliminating the need for expensive assembly of multiple parts.

Close Tolerances

Investment castings typically hold tolerances of .003” - .005” per inch, reducing the need for many secondary machining operations.

Surface Finish

Due to the smooth surface of the wax pattern and the fine grain of the stucco or plaster used to create the mold, investment castings will have a surface finish of 125 RMS or better, with finishes as good as 63 RMS possible.

Consistency

The investment casting process allows for a great deal of consistency and repeatability within the drawing tolerances of the final product.

Cost Effective A single casting can replace complicated and often expensive fabricated parts and weldments. By incorporating many functional features into one casting, cost reductions can be obtained. Machining costs can be reduced by the tight tolerances that are held in the as cast part. Investment castings also have low initial tooling costs as compared to other production methods.
Alloy Selection Depending on the function of the designed part, investment castings can be produced using a variety of alloys, including aluminum, steel, nickel, cobalt, or bronze. No other casting process offers as wide a range of alloys.
Economic Order Quantities Investment castings can be produced in numbers ranging from individual prototype runs to long production runs. There is no need to produce tens of thousands of castings to make the process affordable.
Quick Turnaround Protocast/JLC can produce tooling and first article castings in as little as four weeks, with production runs complete in as little as four weeks following sample approval. Prototype castings can be produced as quickly as five days.

 

 

Home | Advantages | Services | Process | Alloy List | Gallery | Contact Us


Protocast- JLC
9732 Cozycroft Ave. Chatsworth, CA 91311  (818) 882-7848 
sales@protocastjlc.com

 

 

 

 

 

 

 

 

 

 

 

investment casting